俄罗斯叶卡捷琳堡已企业求购胶粘层压塑料，具体要求详见如下：
We kindly ask you to provide us with the information about thermal/adhesive laminate РЕ30/MetРЕТ12/РЕ38 (or analogous with recommended 88-110 micron gauge for film@1020 mm and 65-80 micron gauge for film@670 mm ) having the following operating characteristics:
Delamination effort at longitudinal direction РЕ/MetРЕТ > 150 gf/25 mm
Delamination effort at longitudinal direction РЕ/РЕТ > 300 gf/25 mm
Coefficient of friction 0,1-0,25
Optical density 2,5-3,0
The material should not be corona activated
Gauge tolerance + -10%
Width tolerance -0 + 2 mm
Oxygen Permeation <1,0 cm3/m2/24 hours at 23 0С, 50 % RH

Film outward appearance: film surface should be even. It should not have punctures, cracks, tears, delamination, pressurized wrinkles of one layer displaced towards another, pressurized wrinkles of film inside the reel. There should not be foreign inclusions between film layers during lamination and between the film layers inside the reel. There should not be gels sized more than 2 mm. There can be gels sized less than 2 mm, but their quantity should not exceed 20 pcs per 1 square meter of film.
Joints and their marking – Red or other visible scotch tape on the reel’s side end
There should not be more than 2 joint markings on the reel

The film should be suitable for food use and have a Sanitary-and-Epidemiologic Certificate issued by the Federal Department of Human Rights Supervision (Russian Federation)

Core diameter – 76 mm (core length is 4-5 mm bigger than the reel width)
Reel diameter 700 mm max
Width 1. 1020 mm
2. 670 mm
Reel winding: sealing layer inside, РЕТmet/РЕ layer outside.
Reel edges should be even, without displaced towards each other layers inside the reel.
The reels should be packed waterproof, placed on pallets in such a way as to avoid deformation of reels.
The reels should not come out the pallet size and should be properly fixed on a pallet to avoid reel movements during the process of transportation.
Strength characteristics will be tested at Testometric 250-2,5 СТ test machine.

Ecoupack-trade Ltd CEO
有感兴趣的企业和个人可与其直接联系，（信息仅供参考，业务风险自负）。联系方式：电话/传真：+7(343)3782811/ +7(343)3850048 网址及邮箱：http://www.ecoupack.ru / savicheva@ecoupack.ru